Solis battery automation

Automate your Solis battery, without Home Assistant

Wonder Watt runs your Solis battery through SolisCloud, the same cloud its own app uses, so there is no Home Assistant, Raspberry Pi, dongle or other hardware to set up. You connect it with a SolisCloud API KeyID and Secret with Remote Control access, and your inverter serial number, and Wonder Batt then plans when to charge, hold and export, 48 hours ahead, around your tariff and solar forecast.

No Home AssistantNo extra hardwareWorks through SolisCloud
4.6 out of 5 on Trustpilot · 26 reviews
Wonder Batt's plan for the next 48 hours: prices, solar, home usage and battery charge, with every charge and export window

How to connect your Solis

You need a SolisCloud API KeyID and Secret with Remote Control access, and your inverter serial number. That's all: no software to install.

  1. Apply for API access in the SolisCloud Service Center: open a ticket of type "API Request - System Owner".
  2. In the ticket, ask explicitly for "Remote Control" API access. Without it the keys only allow reading, and nothing can control your inverter.
  3. When Solis sends your KeyID and Secret, enter them in Wonder Watt with your inverter serial number and press Connect.

Then choose how it runs: Wonder Batt plans everything for you, or you set your own schedules and Wonder Watt adjusts them around your prices and solar forecast.

What it does with your Solis

  • Charges when it's cheap. Fills the battery in your tariff's cheapest hours, only as much as tomorrow's solar won't cover.
  • Exports when it pays. Sells to the grid when your export rate is best, and keeps enough back for your evening.
  • Plans 48 hours ahead. Re-plans every 15 minutes as prices, the forecast and your usage change.
  • Looks after your car's charge. On Intelligent Octopus Go it can hold the house battery while the car charges, so the car doesn't drain it.

Specific to Solis

  • Solis has to switch on control access for your account, which usually takes a ticket and a short wait. Once it's on, everything runs through SolisCloud.
  • Charge and discharge windows are written in UK time, so check your inverter's clock is set to UK time too.

Models: Solis hybrid inverters on SolisCloud, including newer firmware with per-slot charge and discharge settings. See supported inverters for every brand.

Wonder Watt or Home Assistant for your Solis?

Home Assistant setups for Solis usually use a Modbus connection through an RS485 adapter or a Solarman data logger on your network, plus an automation or Predbat to plan the battery. That gives you local control and endless flexibility, at the cost of a computer running at home, the wiring, the configuration, and keeping it all working through updates.

Wonder Watt is for owners who want the result without the project: it works through SolisCloud, there's nothing to maintain, and support comes from the people who build it. The trade-off is that it needs SolisCloud to be online to make changes, and it costs a subscription after the free trial. Compare the two in detail.

What owners say

★★★★★
“Have been with Wonder Watt for two years. There is no better service for a "set and forget" automation in my opinion.”
Philip T., Solis · 11 Nov 2026
★★★★★
“Wonderbatt has been running my home battery and solar system for a couple of weeks now and it's great. Turn it on and forget … it's saved me a fortune”
Paul T. · 17 Nov 2026
★★★★★
“Absolutely brilliant app that looks at your system and tariffs and plans your battery charging to maximise efficiency and minimise cost … No more setting up charging slots manually”
Michael M. · 15 Nov 2026

Customers' own words, from Trustpilot; “…” marks words left out. Results depend on your system, tariff and usage.

Questions about Solis automation

Can I automate my Solis battery without Home Assistant?

Yes. Wonder Watt runs your Solis battery through SolisCloud, the same cloud its own app uses, so there is no Home Assistant, Raspberry Pi, dongle or other hardware to set up. You connect it with a SolisCloud API KeyID and Secret with Remote Control access, and your inverter serial number, and Wonder Batt then plans when to charge, hold and export, 48 hours ahead, around your tariff and solar forecast.

Do I need a dongle, RS485 adapter or extra hardware for my Solis?

No. Your Solis already reports to SolisCloud, and Wonder Watt sends its instructions the same way. Nothing is wired to the inverter and nothing runs at your house.

What do I need to connect my Solis to Wonder Watt?

You need a SolisCloud API KeyID and Secret with Remote Control access, and your inverter serial number. Apply for API access in the SolisCloud Service Center: open a ticket of type "API Request - System Owner". In the ticket, ask explicitly for "Remote Control" API access. Without it the keys only allow reading, and nothing can control your inverter. When Solis sends your KeyID and Secret, enter them in Wonder Watt with your inverter serial number and press Connect.

Which Solis models work?

Solis hybrid inverters on SolisCloud, including newer firmware with per-slot charge and discharge settings.

Does it work with Intelligent Octopus Go, Agile and other smart tariffs?

Yes. Octopus Agile, Intelligent Octopus Go, Go, Flux and Cosy, EDF FreePhase and GoElectric, other time of use tariffs or your own rates, with Agile Outgoing, Flux or a fixed rate for export. With Octopus or EDF it reads your tariff from your account, and on Intelligent Octopus Go it uses your car's extra cheap slots.

Can I try it on my Solis before it takes control?

Yes. The trial is 14 days free with no payment details, and Wonder Batt starts with a dry run: it shows you what it would do with your Solis without sending anything to it. Press Go live when the plan looks right.

Put your Solis on autopilot

14 days free. Sign in with Google or your email, no payment details.

Start your free trial

Other brands: GivEnergy · Growatt · Solax · AlphaESS · FoxESS · Sunsynk · Deye · Sigenergy